Difference between revisions of "Bactoscan"
Jump to navigation
Jump to search
| (14 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | The Bactoscan is a measurement of the number of bacteria present in milk (usually expressed as e.g. 20, meaning 20,000 bacteria/ml). High bacteria levels reduces the shelf life of liquid milk and may affect the ability to produce good quality cheese. There are also legal requirements set by the EU in order for the milk to be suitable for human consumption, currently set at a maximum of 100,000 bacteria/ml. Other targets are set by the milk buyer with financial penalties for producers that go over the predetermined level set out in their contract. This is to incentivise farmers to be as hygienic as possible and give the manufacturer an acceptable product to pass on to the consumer. However, a low Bactoscan is also desirable as it can reflect good parlour management, a clean environment and a low level of mastitis in the herd. | |
| − | |||
| − | The Bactoscan is a measurement of the | ||
| − | ==Reasons for a | + | ==Reasons for a high Bactoscan== |
#Poor teat hygiene<br>Due to contamination of the teats from the environment entering the milk. | #Poor teat hygiene<br>Due to contamination of the teats from the environment entering the milk. | ||
#Poor milk refrigeration<br>Allowing the overgrowth of low levels of bacteria that are found in all milk prior to processing. | #Poor milk refrigeration<br>Allowing the overgrowth of low levels of bacteria that are found in all milk prior to processing. | ||
#Poor parlour washing<br>If the parlour is not washed properly after milking, there can be a build up of residues that encourage bacterial colonisation that can elevate the levels of bacteria in the milk. | #Poor parlour washing<br>If the parlour is not washed properly after milking, there can be a build up of residues that encourage bacterial colonisation that can elevate the levels of bacteria in the milk. | ||
| − | #Mastitis (clinical or subclinical)<br>Infection of the mammary gland will usually cause elevated bacterial counts from affected cows. Certain types of infection tend to cause particularly high levels such as | + | #Mastitis (clinical or subclinical)<br>Infection of the mammary gland will usually cause elevated bacterial counts from affected cows. Certain types of infection tend to cause particularly high levels such as S. uberis and S. agalactiae. |
| + | |||
==Investigation of a high Bactoscan level on a dairy herd== | ==Investigation of a high Bactoscan level on a dairy herd== | ||
| Line 14: | Line 13: | ||
When investigating a herd with a high Bactoscan problem, the following areas should form the basis of the investigation. | When investigating a herd with a high Bactoscan problem, the following areas should form the basis of the investigation. | ||
| − | #Record analysis<br>All types of mastitis investigation must begin with an analysis of any available records. For Bactoscan investigations, | + | #Record analysis<br>All types of mastitis investigation must begin with an analysis of any available records. For Bactoscan investigations, look for a pattern when levels are raised. Reports of the Bactoscan are usually available weekly from the dairy or may be available online depending on the farm. If the Bactoscan has substantial fluctuations, this often suggests a problem with mastitis with the peeks occurring due to flares up of subclinical infections. This may also indicate poor detection of clinical mastitis where undetected clinical cases accidentally enter the bulk tank. If the Bactoscan shows seasonal significant seasonal trends, this suggests an environmental problem. Alternatively a relatively recent but very large and sustained increase should ring alarm bells that there is a problem with the cooling system necessitating immediate action. Failure in the wash up routine may create a similar pattern to that seen in the latter or may be a slower increase depending on the specific problem. |
| − | #Environment<br>If cow cleanliness is poor, then this can be a reason for raised bulk milk Bactoscan level. Methods to objectify the level of cleanliness have been described and form the basis of a useful tool to use on farm. This tends to be a problem seen during the housing period, but not | + | #Environment<br>If cow cleanliness is poor, then this can be a reason for raised bulk milk Bactoscan level. Methods to objectify the level of cleanliness have been described and form the basis of a useful tool to use on farm. This tends to be a problem seen during the housing period, but not necessarily and farms practicing seasonal pre-milking teat disinfection may be caught out by a bad spell of weather or a badly poached field. |
| − | #Parlour routine<br>Monitoring procedures in the parlour is essential as part of any Bactoscan investigation. | + | #Parlour routine<br>Monitoring procedures in the parlour is essential as part of any Bactoscan investigation. A common error is for very dirty cows to be washed off before milking and the clusters applied before being wiped dry. This effectively creates a suspension of bacteria on the teat that can actually make the Bactoscan worse! A herd may be pre-milking teat disinfecting, but are they doing it properly? Possible problems with post-milking teat disinfection include the disinfectant being not left on long enough (usually there is a 30 second recommended contact time), the teat not being effectively wiped dry or ineffective products being used. Some farms may only use disinfection during the housing period when teat contamination risk is highest, which can still be effective for controlling the Bactoscan. The extent of gross contamination in milk can be visibly assessed by looking at the milk sock after milking. |
| − | # | + | #Wash up routine<br>The wash up routine and its investigation has been described elsewhere. |
| − | #[[Bulk Milk Bacteriology|Bulk Milk Bacteriology]]<br>Bulk milk bacteriology can be a very useful tool for Bactoscan investigations | + | #[[Bulk Milk Bacteriology|Bulk Milk Bacteriology]]<br>[[Bulk Milk Bacteriology|Bulk milk bacteriology]] can be a very useful tool for Bactoscan investigations. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | [[Category: To do - Nlyons]] | |
| − | [[Category: | ||
Revision as of 18:57, 6 July 2011
The Bactoscan is a measurement of the number of bacteria present in milk (usually expressed as e.g. 20, meaning 20,000 bacteria/ml). High bacteria levels reduces the shelf life of liquid milk and may affect the ability to produce good quality cheese. There are also legal requirements set by the EU in order for the milk to be suitable for human consumption, currently set at a maximum of 100,000 bacteria/ml. Other targets are set by the milk buyer with financial penalties for producers that go over the predetermined level set out in their contract. This is to incentivise farmers to be as hygienic as possible and give the manufacturer an acceptable product to pass on to the consumer. However, a low Bactoscan is also desirable as it can reflect good parlour management, a clean environment and a low level of mastitis in the herd.
Reasons for a high Bactoscan
- Poor teat hygiene
Due to contamination of the teats from the environment entering the milk. - Poor milk refrigeration
Allowing the overgrowth of low levels of bacteria that are found in all milk prior to processing. - Poor parlour washing
If the parlour is not washed properly after milking, there can be a build up of residues that encourage bacterial colonisation that can elevate the levels of bacteria in the milk. - Mastitis (clinical or subclinical)
Infection of the mammary gland will usually cause elevated bacterial counts from affected cows. Certain types of infection tend to cause particularly high levels such as S. uberis and S. agalactiae.
Investigation of a high Bactoscan level on a dairy herd
When investigating a herd with a high Bactoscan problem, the following areas should form the basis of the investigation.
- Record analysis
All types of mastitis investigation must begin with an analysis of any available records. For Bactoscan investigations, look for a pattern when levels are raised. Reports of the Bactoscan are usually available weekly from the dairy or may be available online depending on the farm. If the Bactoscan has substantial fluctuations, this often suggests a problem with mastitis with the peeks occurring due to flares up of subclinical infections. This may also indicate poor detection of clinical mastitis where undetected clinical cases accidentally enter the bulk tank. If the Bactoscan shows seasonal significant seasonal trends, this suggests an environmental problem. Alternatively a relatively recent but very large and sustained increase should ring alarm bells that there is a problem with the cooling system necessitating immediate action. Failure in the wash up routine may create a similar pattern to that seen in the latter or may be a slower increase depending on the specific problem. - Environment
If cow cleanliness is poor, then this can be a reason for raised bulk milk Bactoscan level. Methods to objectify the level of cleanliness have been described and form the basis of a useful tool to use on farm. This tends to be a problem seen during the housing period, but not necessarily and farms practicing seasonal pre-milking teat disinfection may be caught out by a bad spell of weather or a badly poached field. - Parlour routine
Monitoring procedures in the parlour is essential as part of any Bactoscan investigation. A common error is for very dirty cows to be washed off before milking and the clusters applied before being wiped dry. This effectively creates a suspension of bacteria on the teat that can actually make the Bactoscan worse! A herd may be pre-milking teat disinfecting, but are they doing it properly? Possible problems with post-milking teat disinfection include the disinfectant being not left on long enough (usually there is a 30 second recommended contact time), the teat not being effectively wiped dry or ineffective products being used. Some farms may only use disinfection during the housing period when teat contamination risk is highest, which can still be effective for controlling the Bactoscan. The extent of gross contamination in milk can be visibly assessed by looking at the milk sock after milking. - Wash up routine
The wash up routine and its investigation has been described elsewhere. - Bulk Milk Bacteriology
Bulk milk bacteriology can be a very useful tool for Bactoscan investigations.