Difference between revisions of "How Pet Food is Made - Nutrition"

Revision as of 15:55, 28 April 2017

How Pet Food is Made This section is part of Pet Food

There are several different types, or formats, of manufactured pet food including wet (can, pouch, tray), dry (extruded or baked) and complementary treats.(See section on types of pet food). The method of production and the ingredients used varies according to format.

Section Content:

Wet Pet Food Manufacturing

Dry Pet Food Manufacturing

Complementary Care and Treats Manufacturing

Pet Food Safety and Quality

Common Ingredients Used In Pet Food

[[Image:|300px|center]]

Introduction

Wet Pet Food Manufacturing

Dry Pet Food Manufacturing

Complementary Care and Treats Manufacturing

Treats for cats and dogs come in a variety of forms. In the EU, the majority are termed complementary as they are designed to complement main meal complete and balanced pet foods. In the US, the same products are generally identified as "treats" or "snacks". In either case, they should therefore only make up a small percentage of the daily calorie intake. Feeding recommendations on some pet food manufacturers’ products suggest feeding no more than 10% of required daily calories.

Here are some of the most common ways to make treats for cats and dogs:

Extrusion

This method involves mixing ingredients to form a dough that is pumped into an extruder. The dough may be a combination of meat and animal derivatives and dry ingredients such as wheat flour or potato starch that when extruded produced strip like treats. Alternatively, ingredients may be based on rice flour and wheat starch that when combined provides a chewy, spongy texture ideal for products that help clean teeth.

Biscuit Baking

The primary ingredient in this process is usually wheat flour. Wheat flour is combined with vitamins, flavours, water and preservatives to make a soft dough. The dough is then cut into the required shapes and sizes before baking in an oven.

Injection Moulding

Here ingredients are mixed together before being injected into a shaped mould. After cooling the treats are released from the mould. Moulds are usually used to create specific sizes and shapes of chew.

Pet Food Safety and Quality

While each pet food manufacturer has their own recipes, there are pet food safety standards and regulations that everyone must comply with (link to regulations page).

Practical advice is also available to help veterinary professionals establish the credentials of a pet food manufacturer. The World Small Animal Veterinary Association provides a check list that helps with evaluation of the credentials of a pet food manufacturer and is a useful resource for both veterinary professionals and owners.

A responsible pet food manufacturer will take safety and quality very seriously and will have their own defined processes and standards that help ensure the safety and quality of their ingredients and products.

These should start with reliable suppliers and cover the whole process through to feeding the cat or dog and are likely to include:

Selection of reliable suppliers - companies that supply ingredients are regularly inspected by responsible pet food manufacturers to gain “supplier approval”.

Defined specifications for raw materials and regular inspection and testing against these – may also require a certificate of analysis from the supplier.

A clearly defined specification for the product that includes nutritional profile, colour, texture, digestibility and palatability and technical parameters such as moisture content. Routine testing of product against specifications.

Visual inspection of milling process.

Precise measuring of raw material quantities ensuring accuracy versus recipe.

Carefully controlled cooking temperatures and times.

Regular sampling and testing of finished products.

Recording of recipe ingredients through batch records, and of finished product pallets and their destinations to ensure traceability.

Established microbial testing routine for both finished product and manufacturing facilities.

Regular checking of packaging integrity, which may include continuous monitoring through cameras.

Metal detectors and even x-ray machines to locate foreign bodies within finished product.

Verification of nutritional adequacy via chemical analysis of raw materials and / or finished products and / or feeding studies using approved Association of American Feed Control Officials (AAFCO) protocols.

A responsible pet food manufacturer may also choose to implement external audits and voluntary certifications such as ISO 9001:2008 and ISO 14000 through an external accreditation institute.

A pet food company can obtain information and guidance about appropriate auditing and certifications from a selection of organisations including:

GHP (Good Hygiene Practice) - provide link to website

HACCP (Hazard Analysis Critical Control Points) Codex Alimentarius

For more information about the safety and quality standards that apply to a particular product please contact the pet food manufacturer.

Common Ingredients Used In Pet Food

The ingredients declaration on pet food packaging varies according to legislation in place within a country (link to pet food labelling). In Europe ingredients can be grouped together under a category term. For example, many minerals can be included under the additives category rather than naming them individually, and ingredients sourced from animals can be included under the group term meat and animal derivatives (Table 1). Alternatively, a European pet food manufacturer may choose to provide a full ingredients list. Since labelling legislation varies from country to country pet food manufacturers may be required to list all ingredients. For example, in the USA a pet food manufacturer must list all ingredients used providing information about any process used to make the ingredients and the chemical names where appropriate (for example, pyridoxine hydrochloride (source of vitamin B6). A glossary of commonly used ingredients in the EU is provided in Table 2.

Table 1 – Category terms within the European Union

Details in Excel spreadsheet (sheet 3)

Table 2a – Glossary of common ingredients used to make wet pet food in Europe

Details in Excel spreadsheet (Sheet 1)

Table 2b – Glossary of common ingredients used to make dry food in Europe

Details in Excel spreadsheet (Sheet 2)

@@ Line 33: / Line 33: @@
-=== Overview ===
-'''Dry pet foods are made by mixing dry and wet ingredients together to form a dough. In the extrusion process, the dough is heated under pressure, then pushed through a die machine that cuts the kibbles.''' Kibble size and shape varies according to the product specification. The kibbles are dried, cooled and spray coated. Some dry foods may also be produced by means other than extrusion, such as baking.
-=== Ingredient Selection and Sourcing ===
-Many of the ingredients used in the manufacture of pet food are described as animal (or fish) derivatives or by-products. These ingredients are the parts of the animal surplus to the requirements of the human food industry. In dry pet foods, '''animal derivatives are commonly used in a meal form''' (such as chicken meal, poultry by-product meal) where meat and animal derivatives are cooked, the fat removed and the remaining material dried to create a dry meal). By-products may also be used in fresh or frozen form. Many of the other ingredients such as cereals, grains, and vegetables used in dry pet foods come in dry form and are milled or ground prior to mixing. A recipe is also likely to include oils and fats, vitamins and minerals required to ensure the product delivers all the essential nutrients.
-=== Ingredient Weighing and Preparation ===
-Ingredients are carefully selected according to a pet food manufacturer’s specific recipe, formulated to deliver complete and balanced nutrition for cats and dogs. Dry ingredients are ground and sieved where required and then mixed.
-=== Cooking and Cooling ===
-The dry mix is combined with wet ingredients, water and steam in a preconditioner, which hydrates the powders, creates a dough and starts the cooking process. The dough then enters a machine known as an extruder, which cooks the dough under pressure. At the end of the extruder the dough exits under pressure through a die plate creating ribbons of pre-specified shape that are then sliced into the pre-specified size using a rotary cutter.
-After extrusion and cutting the kibbles are air dried in an oven to remove moisture and then cooled. '''Reducing the moisture content is an important step in maintaining freshness and preventing food spoilage.'''
-When baked, the dough is rolled out and cut into shapes, then baked in an oven (similar to cookies or biscuits).
-=== Kibble Coating ===
-After drying and cooling, kibbles often enter a revolving drum where they are evenly coated with a mix of flavours to enhance taste, and preservatives to prevent spoilage through the shelf life of the food. Flavours or other coatings may also be sprayed on baked foods as they exit the oven.
-=== Packaging ===
-Packs are filled according to the declared weight and the packaging is appropriately sealed to prevent contamination.
-=== Storage and Distribution ===
-Packages are stored in boxes or wrapped on pallets and stored in warehouses ready for distribution to customers.
 == Complementary Care and Treats Manufacturing ==